Category: Mineral Processing

Concentrates and tailings produced by the methods outlined above must be dewatered in order to convert the pulps to a transportable state. In addition, the water can be recycled into the existing water circuits of the processing plant, greatly reducing the demand for expensive fresh water. Filtration Filtration is the separation of a suspension into a solid…

Flotation is the most widely used method for the concentration of fine-grained minerals. It takes advantage of the different physicochemical surface properties of minerals—in particular, their wettability, which can be a natural property or one artificially changed by chemical reagents. By altering the hydrophobic (water-repelling) or hydrophilic (water-attracting) conditions of their surfaces, mineral particles suspended…

Gravity methods use the difference in the density of minerals as the concentrating agent. In heavy-media separation (also called sink-and-float separation), the medium used is a suspension in water of a finely ground heavy mineral (such as magnetite or arsenopyrite) or technical product (such as ferrosilicon). Such a suspension can simulate a fluid with a higher density than…

Concentration involves the separation of valuable minerals from the other raw materials received from the grinding mill. In large-scale operations this is accomplished by taking advantage of the different properties of the minerals to be separated. These properties can be colour (optical sorting), density (gravity separation), magnetic or electric (magnetic and electrostatic separation), and physicochemical…

In order to separate the valuable components of an ore from the waste rock, the minerals must be liberated from their interlocked state physically by comminution. As a rule, comminution begins by crushing the ore to below a certain size and finishes by grinding it into powder, the ultimate fineness of which depends on the…

After one or more samples are taken from an amount of ore passing through a material stream such as a conveyor belt, the samples are reduced to quantities suitable for further analysis. Analytical methods include chemical, mineralogical, and particle size. Chemical analysis Even before the 16th century, comprehensive schemes of assaying (measuring the value of) ores were known, using…

Routine sampling and analysis of the raw material being processed are undertaken in order to acquire information necessary for the economic appraisal of ores and concentrates. In addition, modern plants have fully automatic control systems that conduct in-stream analysis of the material as it is being processed and make adjustments at any stage in order to produce…

Mineral processing, art of treating crude ores and mineral products in order to separate the valuable minerals from the waste rock, or gangue. It is the first process that most ores undergo after mining in order to provide a more concentrated material for the procedures of extractive metallurgy. The primary operations are comminution and concentration, but there are other important operations…